一、產品概況：
Product overview:

本儀器是參照國家標準GB1210-92《塑料水平和垂直試樣與小火點火源接觸時燃燒性能的測定》之方法：
This instrument is a reference to the national standard GB1210-92 plastic horizontal and vertical combustion performance when in contact with the fire fire small sample determination of the method:

根據國家標準GB/T2408-1996《塑料燃燒性能試驗方法--水平法和垂直法》的規定而設計的一種高智能化實驗室用燃燒性的材料測試儀器。
According to the national standard GB/T2408-1996 "plastic combustion performance test method, horizontal and vertical method" regulation and design of a highly inligent laboratory combustibility material testing equipment.

產品符合GB/T2408-1996、GB5455-85、GB2408-80、GB4609-84。
Products comply with GB/T2408-1996, GB5455-85, and GB4609 GB2408-80-80.

二、產品特點：
Second, the product features:

1、本儀器具有自動化程度高，自動記錄時間，準確顯示測試結果等優點。
1, the instrument has a high degree of automation, automatic recording time, accurate test results, etc.

2、水平和垂直方向放置的塑料試樣暴露于小火焰點火源時，測定試樣的有焰燃燒和無焰燃燒時間及燒損長度。
2, the horizontal and vertical direction placed small plastic samples exposed to flame ignition source, test sample of flaming and length of flameless combustion time and damage.

三、產品主要指標：
Three, product main indicators:

單片機控制，試驗數據自動存儲，讀取自動計時，自動點火
Single-chip microcomputer control, automatic test data store, read the automatic timing, automatic ignition

本生燈施加火焰時間有10s、12s、30s可選擇，精度±0.2s，倒記時，撤退報警提醒。
Bunsen burner on fire time is 10 s and 12 s, 30 s choice, accuracy + / - 0.2 s, events, evacuation alarm to remind.

本生燈內徑：9.5mm±0.3mm
Bunsen burner inner diameter: 9.5 mm + / - 0.3 mm

本生燈可在0-450范圍內傾斜
The Bunsen burner can be tilted in 0-450 range

本生燈藍色火焰高度：15mm-45mm可任意調節，配有火焰高度標尺
Blue Bunsen burner flame height: 15 mm to 45 mm can be adjusted, and is equipped with a flame height gauge

試樣夾zui大夾指厚度：≤13mm
The sample holder clip refers to the largest thickness: 13 mm or less

試樣夾垂直方向調整距離：≤100mm
The sample holder vertical direction adjustment distance: 100 mm or less

試樣夾水平方向調整距離：≤70mm
The sample holder horizontal adjusting distance: 70 mm or less

水平試樣夾可900收放
Level of the sample holder can be 900 release

配紡織品試樣夾
With textile sample holder

可燃?xì)庠矗杭淄椤⑻烊粴狻⒁夯蜌狻⒚簹?br />Combustible gas source: methane, natural gas, liquefied petroleum gas, gas